Does anyone remember the crazy bandpass box a bunch of places used to sell that was built like a tank? My mind has gone blank and I can't remember...
I'm using (2) American Bass D4 XFL's I'm going to put'm in 7cubes, I was going to use the 16 sq.in. per cu. ft. theory but when I converted this to...
To give you an introduction, My name is Christian and I have been in the db drag scene since 1998. I finally got a chance to review the Jl...
I need help on a starting point in a Mercedes e320 wagon 1994. Its decent loud so far basically in a golf box, but its obvious it wasn't the best...
-Groundpounder type build. Designed to play music and demo at shows while putting up numbers too
I have a pair of the old BTL's with the single magnet and was thinking about upgrading to the N2's (or possibly N3's) for ssnw and bassrace.
Found this on Diyma and thought some of you might be interested in reading this...
"My name is William Savard Jr., and am currently in the...
I have 1 blown Audiopipe SPL that I would like to give away to clean up my garage.
Has anyone used this sub? It's $141 with 1200 RMS. Need feedback before buying a lot of 10 for the shop..... What it do?
Will I see a performance difference?? It was 2 12s run by 1200 watts total in 1.3 sealed EACH. NOW it will be 2.0 sealed EACH and 1500 watts total.
I have a 2010 Tundra and I am wanting to get a ported box for 2 10's. The box is 2.05 cu ft that's undivided. 5.1" mounting depth.
I'm wondering if anyone can tell me who/where I can get some sub parts?
I have baskets and motors but need soft parts for Soundstream XXX, T3...
1994 camry4 door car no back seat going to wall it of was thinking 4 15s xfls
looking for advice on how i should wall them, been seeing alout of...
Anyone had trouble with surrounds splitting on soloX 10's on low power (in a small box)?
About 2000 watts into a pair, noticed a loud buzzing noise,...
Is there even a comparison?
Witch one do you think is better and why?
has anyone used the B2 audio rs range?
specifically the RS10s?
whats your opinion?
i am looking for bass race... will they...
i know that the old rules stated all amps, enclosures etc must be under the window line. ive been looking around and had a bit of trouble finding the...
I WOULD LIKE TO GET SOME WORDS OF ADVICE ON DOING A SUBS UP PORT BACK ENCLOSURE FOR MY 92 5.0 GT. MOST OF MY BOXES HAVE BEEN SUBS UP PORT FIRING...
ok i have a single memphis m3 12 inch. i have a ported box. its about 3.36 cubes. port is 3 inch wide 17.5 inch high and 5.5 inchs long. i know thats...
looking for any info on 97 grand am with a fixed back seat "doesn't drop " like box that will fit throught trunk opening what setups have...
Does anyone out there have the T/S parameters-specs for a Memphis 15-M3 Mojo dual 2 ohm 12" sub? I'll be receiving a new condition/never powered...
Hi, guys, just got 9915 D1 ohm sub and I`m going to dB Drag in the start of June. Need some advices what box to use. It will be installed in Golf MK4...
I have been logging this build on a different site and thought that I would move it over. well the whole thing started when I took a new job out of...
Hey guys, here is my dilemma. I have a 9515 pushed by an M3a in my truck. Right now I have the box in the (40) position of the 60/40 seat. (I removed...
that when I have some one design me a horn for my solo x for a screw around ht/ garage banger that I cant understand the cutsheets, I showed a few...
Supported videos include:
Please paste your code into the box below: