Originally posted by emu:
There are 2 ways to measure power.
The first is to take a voltage reading with the impedance known. Let's say you have...
-at the slightest sound of bass you run to try and find out where its coming from.
-you spend more time looking at...
Ok here is where we get to see just who has been paying attention.
The first item on the list of things to do when you decide to build a custom...
do i want the center of the dash or directly in front of me to be the center of the stage cuz they both sound good.
OK- I have asked a lot of people but get confused bluster or an answer that doesn't make sense- at worst get no reply.
1. Is it possible to...
I am going to be putting a set of 5.25" comps in Kick Panels and would like to put some 6.5" subs in about .15 - .2 sealed enclosures in...
Walls are pretty easy to build once you understand the basic procedures and have an image in mind of what you are trying to achieve.
I was wondering if anyone has any opinions on which outputs are better or are they the same. Thanks
There are alot of questions concerning the tools and procedeures for working with Plexiglass. I hope this answers a few of those questions.
well im about to go shopping for a router.. any suggestions?
will mostly be used for speaker hole cutouts, for 12's and 15's, and needs to cut thru...
I just finished my first fiberglass project, and now it's time to paint.The problem is, I don't know which paint to use, what is the prep,...
ok, at the sound levels we reach, it's all about the pressure in the cab, right? so why would we port are boxes?
follow me here, in a ported box,...
If the pre amp output of a deck is 4V and the input stage on the amp is between 500mV and 2.5V, even if I turn the gains way down...Will I still...
Supported videos include:
Please paste your code into the box below: