Marlo Stanfield
Hey just seeing if it can be done(possibly requiring mods) and if anyone has any experience with these amps at that voltage.
Quote 0 0
Nightshade
It will work on 16 volts with no mods.
Quote 0 0
Marlo Stanfield
Anyone used/tried these at 16v before??
Quote 0 0
tekk45
The first run(20 or so) will run up to 18V then a voltage cap was implemented. The later versions shut down at 15.8-16V. Run at 15.5V nominal of .35 with a total reactive of 1 ohm, the amp drew 275A DC current. This was done around 60Hz. Lower notes will draw more current. I ran a pair of them strapped at .5 and once current draw exceeded 600A they started to bounce off of the protect circuit then shut down. Still a solid amplifier. I would run it at 15.5 with quite a few batteries or contact bob@americanbass to see if it can be modded to run at 16/18V.

Team Neo - Eric
Quote 0 0
Contact Us | Legal Notices | Privacy