emoo99
2 kicker l7 15's on 2000rms amp
My quesion is how much port area will be good for these subs? i'm not leaning toward strictly spl.. a good mix of sq and spl..
so my box is going into the back of a hatchback the dimensions are
37.50 wide
24 High
14.50 deep
.75 mdf

the subs will be facing forward toward the back seat and the port will be facing up because i can't make the port deep enough to be on the same face as the baffle.

i want to tune the box between 30-35 hz for a mix of spl and sq.. i want it loud but don't want it to sound too sloppy.
Quote 0 0
splfrek
go download winisd its a great program.

a good rule of thumb on port is 16"sq per cuft
Quote 0 0
emoo99
Quote:
Originally posted by splfrek:
go download winisd its a great program.

a good rule of thumb on port is 16"sq per cuft
i do have that program, did all the dimensions and got it figured about 34hz would be best.. but it does not tell me anything about port area
Quote 0 0
splfrek
you can adjust that stuff on the program!
Quote 0 0
1badstang
I have had some pretty good luck with the linear design program.
Quote 0 0
team unreal sounds
honestly go with the kicker prefab for the subs i use the kicker prefab with the 12" L5's in trunk doing a 146 and also sounds good on daily only thing i did to box is pulled that white cotton **** out
Quote 0 0
Contact Us | Legal Notices | Privacy