Tor S Aamodt Show full post »
team carmania
oke thank you

but now i need to know how to messure between window and front seat or between sensor and front seat
Quote 0 0
Team DD Belgium - Dieter
Quote:
Originally posted by team carmania:
oke thank you

but now i need to know how to messure between window and front seat or between sensor and front seat
All reflective surfaces, with the exception of the windshield and dashboard, must be located a minimum of 12 inches (30.48 cm) from the measurement sensor. (Intent: Reflective surfaces shall not interfere with the measurement equipment.) For clarification purposes, the dBDRA considers any surface greater than 3/8" (9.525 mm) in width to be a reflective surface.
Quote 0 0
augustijnen Peter
i think what he meens is

does he need to messure with sensor in
or can he messure from the sensor spot( without sensor)
The one and only , back for more !!!!
Quote 0 0
Team DD Belgium - Dieter
Quote:
Originally posted by augustijnen Peter:
i think what he meens is

does he need to messure with sensor in
or can he messure from the sensor spot( without sensor)
See my post above
Seat has to be 12" from the sensor itself.
Quote 0 0
Team Carmania - Tom
oke but why all judge have an sjablon off 33.1 cm
and not the 12" (30.48 cm ) what you say dieter ?
we also tink always 30.5 cm and now they have sjablon off 33.1 cm why ?????
Quote 0 0
Lawaetz
Sorry for the missing pics, it was my pics but i have closed the webhotel where the was hostet.
Mikes drawing is correct, but quite ugly

The mig-jig is ofcorse longer than 12", as there is 12" from the end to the middle of the "cut-out".
So if you use the mig-jig to measure from the sensor to the seat, you must place the mig-jig under the sensor, so the middle of the "cut-out" is at the same plane as the sensors edge that is close to the seat.
Hope it makes sense
Quote 0 0
dB Drag Feldjaeger
Quote:
Originally posted by Lawaetz:

Mikes drawing is correct, but quite ugly
Do it better in 1 minute

Yeah, you right, the cut out hole from the micjig is the measurepoint from sensor point to all around it. I everytime set the micjig to the windowoutside and the cutout is at the sensorpoint. If there is something in the way around the circle, the competitor have to remove it...

Regards
Mike
[37309a0]

RETIRED certified 4X Head Judge dB Drag Racing & Bass Race
                 
dBDRA Staff Member/ Head Judge
World Finals Head Judge  &  European Finals Head Judge
     WF XI, XIII, XIV,                         EF '05, '12, '13

Quote 0 0
team carmania
thank you all for the input

now we now that we have been f...ed

at our last game
Quote 0 0
augustijnen Peter
that 1" is not gonna make a big difference
nothing to worry about
The one and only , back for more !!!!
Quote 0 0
team carmania
Quote 0 0
emperor
yooh thats the pics you called about.
do you have more of the pics from kleuvers car?
Quote 0 0
Team Carmania - Tom
mmmm nice pic
let me look at my car if it is the same
Quote 0 0
Mb low hertz
Quote:
Originally posted by team carmania:
what are the measures of the template ?

thanks
Quote 0 0
Contact Us | Legal Notices | Privacy