absolutestereo
Im trying to run a maxxlink on a 18 volt system, i wanted to use the vehicle 12 volt syem to run it but if i hook the rca's to the amps that have 18 volts going to the ground it will backfeed right back into the maxxlink and the maxxlink will read 18 can anyone help or if your using a 18 or 16 volt system and running a maxxlink let me know what you did thanks
Quote 0 0
dropbottommazda
Maxxlink is 12 volts ..
Quote 0 0
18inchjeepin
is your 18v grounded to the same spot as the 12v?

it needs to be
Quote 0 0
absolutestereo
yea the ground is not seperated from the chassi ground cause of the fact that the alternator grounds itself though the motor so i use the chasi groung and the pos from the alternator to charge the batteries in the back. so is it going to be a problem if i run the rca's though the maxxlink and then to the amps only if i run a seperate wire from the trucks 12 volt system. i just dont want to pop anything this stuff is to damn exspensive .
Quote 0 0
Contact Us | Legal Notices | Privacy