I know some guys have tested this.so i would like to hear from them.
I had 1 run of power to my 800ci batt in the front running off a 120 amp alt.a 2k amp would drop it down to like 10.5 and below sometimes.well i put the amp on the same side of the car as the battery and made 2 short runs of pos and did 2 grounds to the frame from the amp and from battery to frame.it's a solid frame from front to back.now it only drops down too 11.5v this is all burped at 60hrtz
so I'm wondering if i will make a gain grounding the amp to the battery with 2 runs?will it make that big of a difference if i do 8 runs total on a 2k amp?
oh and got another question. what about making a gain not using the 2 150 fuse's up front?
I was wondering this exact question.
I have two runs of 2/0 and four runs of 1/0
I wanted to know if I should do 3 runs of each or does the ground not make a big difference going to the battery and just do maybe one 2/0 to the battery ground and the rest to the positive?
what did you find out as no one replied to your question?