sundownz
I hadn't seen them yet so I took some pics :












* Output FETs


* Power Supply FETs
Quote 0 0
murilo
nice
Quote 0 0
LukaQ
output fets are pretty bad, amp looks good, slim
Quote 0 0
Mark Masterson
Was it that hard to put a little bit of solder more ??
I know there is bottom layer, BUT...

Quote 0 0
Sinister-David
Quote:
Originally posted by Mark Masterson:
Was it that hard to put a little bit of solder more ??
I know there is bottom layer, BUT...

i agree should be soldered on top and bottom
Quote 0 0
D-Bass
I use solder flux made from gypsie tears.
Quote 0 0
pimpin at my house
there should be solder on the top when it goes thru the solderflow but qc should have picked it up.

i am sure it is soldered on the backside good. as long as it is is a middle leg shouldnt break from vibration.

nice design...
Quote 0 0
i like fi
Quote:
Originally posted by LukaQ:
output fets are pretty bad, amp looks good, slim
Why you say that fet are bad? whats wrong with that model fets.
Quote 0 0
Double D
The leads break before the solder pads underneath the board, I've seen it plenty of times repairing 4kw's at our shop.
Quote 0 0
D-Bass
If you can heat it fast enough and then shunt the heat away, let the solder run up the legs. adds a little strength.
Just don't be a dumb-dumb and try using a 200W gun and leaving it on there for a long time.
Quote 0 0
Contact Us | Legal Notices | Privacy