Aruman
Hi, does anyone know if Whip Audio 6.5" come also in 4ohms or only in 8ohms? If so how do they wired them to get rated power of 100Wrms? with what Tweeters and Crossover they use with them, what Amplifiers?
I've searched for Amps that put that kind of power at that ohm load but with no luck.
And where to buy them from?

And do how they compare with the PowerBass 4XL 6.5" series?

Thanks,

Aruman.
Quote 0 0
Sinister-David
they look like there the same speaker to me i own some of the PowerBass 4XL 6.5 and only thing i can see different are the speaker wire connection the powerbass has push button terminals and comes in 4 ohms. The powerbass are loud as hell even with 50watts RMS feeding them and can take a hell of alot more. i'm getting ready to change the amp out and give them 150 watts RMS each i have 4 of the 6.5's installed right now will end up with a total of 8 installed. o and a warning to u what ever u do. DO not aim them at u they will hurt lol
Quote 0 0
18inchjeepin
wire 2x 8ohm in parallel, should be easy to find 200 wrms @ 4 ohm.

Ya Tommy's truck bed is rediculous, I had trouble standing 5 ft from it
Quote 0 0
Sinister-David
Quote:
Originally posted by 18inchjeepin:

Ya Tommy's truck bed is rediculous, I had trouble standing 5 ft from it
yea i know was hard to even stand 5ft+ from it at world finals last year
Quote 0 0
Aruman
Thanks guys, so both will be good?

And is there an 4x 200Wrms at 4@ohms Amplifier out there?

Thanks.
Quote 0 0
TeamSubGoPoof
i bet there is a 2 x 400 at 2 ohms stereo

You should be able to find a ton of them!
Quote 0 0
Aruman
Thanks TeamSubGoPoof,

can you list some good 2x 400@2ohms?

Thanks.
Quote 0 0
Sinister-David
SD1000-4AB
4x 250W (1 ohm)
4x 200W (2 ohms)
Bridgeable - 12.6V

Crunch GPV1600.4
1600W 4-Channel A/B-Class Ground Pounder V-Drive Amplifier
200W x 4 @ 4-Ohms
400W x 4 @ 2-Ohms
for price i might get one of these

Soundstream TRX4.880
880W 4-Channel Class A/B Amplifier
RMS Power @ 2-ohm: 220W x 4

just a few i found might work nice there alot more out there

[ 09-02-2009, 10:58 PM: Message edited by: Sinister-David ]
Quote 0 0
Aruman
Thanks Sinister-David,

So the Crunch GPV1600.4 is good, but is it Overrated or is it Rated?

the SD are nice as well but expensive for me right now.

Thanks.
Quote 0 0
98Expo
Quote:
Originally posted by 18inchjeepin:
wire 2x 8ohm in parallel, should be easy to find 200 wrms @ 4 ohm.

Ya Tommy's truck bed is rediculous, I had trouble standing 5 ft from it
are you running any tweeters with these, or just crossing these over? I ordered 4 4xl's for now, 4 more next weeek. I had several people tell me to just cross these over at 100hz or 150hz and they would be plenty loud
Quote 0 0
Sinister-David
MB Quart DSC 4125 is also a good amp for these too running one right now and sounds dam good just wired 2 to get 2 ohms and can run 8 off 1 amp

# RMS Power Rating:

* 4 ohms: 125 watts x 4 chan.
* 2 ohms: 250 watts x 4 chan.
Quote 0 0
D-Bass
Hifonics Zeus 1006
Quote 0 0
MREZSTREET
Quote:
Originally posted by Sinister-David:
SD1000-4AB
4x 250W (1 ohm)
4x 200W (2 ohms)
Bridgeable - 12.6V

Crunch GPV1600.4
1600W 4-Channel A/B-Class Ground Pounder V-Drive Amplifier
200W x 4 @ 4-Ohms
400W x 4 @ 2-Ohms
for price i might get one of these

Soundstream TRX4.880
880W 4-Channel Class A/B Amplifier
RMS Power @ 2-ohm: 220W x 4

just a few i found might work nice there alot more out there
how did crunch get in that list lol way less of a amp than the other 2....i got one im pulling out f wifes ride and sellin cheap to the next kid with cash lol
Quote 0 0
zlibby76
I've got 3 PPI PC 250's that are rated at:

2 x 50wrms @ 4ohms; 2 x 100wrms @ 2 ohms; 1 x 200wrms @ 4ohms, bridged.


These are the OLD SCHOOL PPI's. VERY UNDERRATED!!!

PM me for pricing if you're interested.
Quote 0 0
Contact Us | Legal Notices | Privacy